When a furnace maintenance is performed a combustion analysis should be performed to identify any problems that couldn't be found by a visual inspection. You want to know what the Carbon monoxide level your furnace is producing as well as the oxygen/CO2 levels and stack temperate. The analyzer will also give you a calculated efficiency rating with the information the analyzer receives. You should have >100ppm of Carbon monoxide output during normal operation of your gas furnace. When you have higher numbers or CO numbers increasing during operation their is a problem with the furnace the technician should then find the cause of. This is just a brief explanation I'm trying to get across to those who get their furnace maintained and to those who don't! Check to see if anyone in the company has a NCI certification for carbon monoxide/combustion analysis.
Extensive training – Over the years, we have had to learn continually and update our skills to stay top-of-the-line. We continue to offer state-of-the-art products today with the service skills to match. We offer 800 hours of training classes to our technicians every year. They also have access to factory resource personnel and engineers for consultation.
The fully licensed and insured, NATE-certified team from Marky Mark's Heating, Cooling & Plumbing, LLC is always available when you experience a problem with any make, model, or style of HVAC or plumbing system.  We offer 24/7 Emergency Repair in Thornton, CO & Westminster, CO and throughout the Northern Denver Metro area, handling residential and light commercial application, arriving promptly and prepared to complete the majority of issues in a single visit.

Whether you are looking for gas furnace service or repair, quality installation of a furnace, heat pump or air conditioner, mini split ductless heat pumps, endless hot water from tankless water heaters, better air quality in your home or just a filter change or duct cleaning, Greenwood Heating is your best choice of Seattle heating contractors and cooling specialists.
Adams Aire-Flo Amana American Standard Arcoaire Armstrong Bard Bryant Carrier Centurion Clare Coleman Comfort-Aire Comfortmaker Columbia Dayton Dornback Ducane DMO Industries Evcon Fedders Gibson Goodman Hallmark Heat Controller Heil Homart ICP Commercial Intertherm Janitrol Keeprite Kenmore Kerr Lennox Luxaire Maytag Newmac Nordyne Olsen Oneida Royal Payne Rheem Ruud Sears Spartan Tappan Tempstar Texas Furnace Thermo-Pride Trane Weatherking Weil Mclain Westinghouse Williamson Thermaflo York
Having a company looking out for all your heating and cooling needs shouldn’t mean that you’re stuck with any run-of-the-mill shop who cuts corners. Heating and cooling has been our excitement since 1962, and it’s evident in the work we provide to our customers. We’re committed to providing you the very greatest when it comes to all things HVAC, whether it’s service, maintenance or heating and cooling systems.
No matter how minor you may think that a problem with your air conditioner is, it will eventually lead to more serious problems if given the time. Prompt air conditioning repair service is the best way to limit the damage that any problems with your AC can do. Let our Puyallup air conditioning repair technicians get your AC back on track in no time.

Many homeowners don't often think of the state of their furnace—that is until, the first cold day of the year comes around and the furnace won't turn on or only blows cold air. Keeping an eye out for common signs of trouble can help you avoid a complete furnace breakdown. Addressing any issues early on can also help you avoid most extensive (and therefore, more expensive) repairs down the road.

House of Heating Incorporated offers furnace service appointments that help keep your furnace in excellent shape and running efficiently for you all year long. Whether that’s discovering small issues before they become big problems, identifying potential safety hazards or making sure you’re staying in line with your manufacturer’s warranty, our experts have you covered. Our trained technicians complete furnace service with skill, inspecting a number of components in and around your furnace. In fact, our multi-point inspection can help make sure your system works smoothly throughout the winter.


Put simply, any home that uses air pushed through ductwork for heating purposes takes advantage of forced air heating. In other words, this term refers not to your furnace, but to the delivery method of the heat throughout your home. Forced air heating is possible with electric or gas furnaces, or a heat pump. Any issues with this delivery system that aren't directly related to the furnace likely have to do with the duct work, which costs between $35 and $55 per linear square foot to repair, or the air handling unit.

Established in 1984, B&B Heating & Air Conditioning is firmly established as a trusted provider of heating, cooling, and air quality services across Arvada, Broomfield, Wheat Ridge, Littleton, Cherry Hills, Englewood, Greenwood Village, Lonetree, & Lakewood, CO.  We’re proud of our track record, and committed to continual improvement.  When you contact us for installation, maintenance, or repair, we never underestimate the importance of your time, comfort, or investment.  For emergency situations, our dedicated technicians are on-call, 24 hours a day, 365 days a year.


When it comes to saving money, using a free online coupon is a no-brainer. We offer these coupons to our customers who complete the online form to help reduce the cost of the service. Please note that the , the 30.00 off work performed coupon serves as an plumbing, HVAC and electrical coupon as well. Not many plumbing companies can boast that they also provide additional HVAC as well as Denver Electrical services, however at Brothers Plumbing, Heating and Electric – we do it all! It is important to call a professional when problems arise, and we will help you out every step of the way, including discounts!
If your furnace sputters to a halt during the evening or overnight in the middle of winter, you can bet that the indoor temperature will plummet by morning and everyone will be cold and uncomfortable. It isn’t as bad as outside because you have wind protection and residual heat, but no one in the house will be happy. The key to finding a quick solution to these kinds of scenarios is to align yourself with a reputable, reliable service provider before there is a problem. If you have a local expert in your corner, you can call as soon as something happens and your service disruption will be minimal.
When you change the temperature on your thermostat, or the temperature in your home drops, a signal lets the furnace's igniter know that it's time to turn on. Igniters exist in both hot water boilers and forced air furnaces, replacing pilot lights as the switch your unit needs to kick on. Naturally, this is a core part in making sure it works reliably. When it stops working, your unit will not longer know when to actually heat your home. Fortunately, furnace igniter repair doesn't tend to be a major budget problem, and costs less than $300 on average.
The main purpose of your furnace filter is to ensure that none of the additional materials your fans pull back into the unit - such as hair and dust - actually damage the furnace or its parts. In the process, it also improves air quality in your home. Some annual inspections will include changing and cleaning this part of the unit. That said, you can also clean or change your furnace filteryourself. Costs for new filters range based on brand, but tend to be around $30.
North Winds Heating & Cooling is your go-to Greater Lansing HVAC company for furnace repairs and installation this season! We take great pride in satisfying our customers and are committed to providing quality service at all times. Contact us today to learn more, need service, or to request a quote. Our location in Okemos makes us an excellent choice for repairs and services all throughout Greater Lansing towns including Haslett, DeWitt, Bath, East Lansing, and Grand Ledge. Our heating and cooling team looks forward to improving your lives one degree at a time. 

Inspect your furnace thermostat by first making sure that it’s turned on. Also, ensure that the thermostat switch is turned to “heat” and not “cool”. If your furnace will still not start with the thermostat on, try adjusting the temperature settings to a few degrees higher. Inspect any visible wires for breaks or splits, and make sure your thermostat batteries are not dead. Do not touch any open wires; contact a professional.
In a place like Chicago, having a well-maintained, properly-functioning furnace is vital to your comfort, and your wallet. With advances in technology over the past several years, furnaces have changed quite a bit. The standard furnace service of years past would pale in comparison to what’s needed to keep modern furnaces running at an optimal level.

Inspect your furnace thermostat by first making sure that it’s turned on. Also, ensure that the thermostat switch is turned to “heat” and not “cool”. If your furnace will still not start with the thermostat on, try adjusting the temperature settings to a few degrees higher. Inspect any visible wires for breaks or splits, and make sure your thermostat batteries are not dead. Do not touch any open wires; contact a professional.
Regarding your post, Every technician performs a maintenance differently. Today's modern furnaces really don't require as much maintenance as older style systems did. For instance: Older furnaces had drive belts, pulleys and motors with oil ports.Today's blowers are direct drive no belts, no pulleys, sealed bearing motors no oiling required. All of the new modern technology cuts the maintenance time in half if not more. Today's equipment has multiple safety's in place so that in case of a failure the system will shut down. non serviceable control boards or (Brains) monitor system functions. Unlike oil systems, the maintenance on a gas system can possibly be completed in less than half the time. I'd say 20 to 30 minutes is about right unless a service issue arises. In the 30 minute time span, the doors can be removed, system components can be visually inspected, the flame can be inspected and co test can be performed for spillage and vacuum of the combustion area can be performed if needed. The air filter should be checked and the humidifier can be activated. Remember that probing into a perfectly functioning system can be detrimental to its lifespan. My advice is change you air filter, keep the area around the equipment free of dust and try not to store in close proximity to the heating plant. Be sure you have an updated quality carbon monoxide detector in your home. Regarding the crack in your heat ex-changer, If the heat ex-changer had a crack in it, the system it should have been shut down right then and there. Be aware that Carbon monoxide may be entering your living space due to that crack. Have a knowledgeable company come back and do a CO test in your home at the supply vents and use a scope to check your heat ex-changer for cracks. I hope this helps you. Bottom line, you have to trust the company that you are using. If you feel uncertain about their capabilities, then more than likely, you instinct is correct. Good Luck to you.. Happy Holidays
Specializing in Bryant brand heating and cooling products, we offer a broad selection of innovative, industry leading technology to improve the comfort, health, and efficiency of your home or office. Our technicians are certified and highly trained to provide residents in Thornton, CO & Westminster, CO with unmatched heating and air conditioning services, including installation, repair and maintenance. Plus, our team of plumbers offers a range of indoor and outdoor plumbing solutions, including repair and installation of faucets, fixtures, water heaters and toilets, frozen pipe prevention and repair, and natural gas line service. Give us a call and take advantage of our proven dedication and prompt response.

Furnace Repair Company

×