At B & B Heating & Cooling, heating and cooling isn’t solely our job, it’s our passion. We’re dedicated to providing you with high quality HVAC service in Florissant. No matter the size of the problem or time of day, you can rely on us to get the job done properly. After all, B & B Heating & Cooling has been working in the community since 1985, bringing comfort to our customers right when they need it.
“The manufacturers that built them all agree on this; you should get it serviced once [a year] for heating and once for cooling," says Paul Mills, owner of Air Experts Heating & Cooling in Raleigh, North Carolina. "Tuning it up and checking it out is definitely recommended. Much like a car, if you ignore it, a lot more things break. You [will] extend the life of it and help prevent major breakdowns.”
While there's nothing you can do to guarantee your air conditioner or furnace will never need repairs, there are ways to take better care of your system. Changing out the air filters every 3-6 months, making sure nothing is obstructing or interfering with the outside unit, and keeping all vents unblocked in well-used rooms will help keep your air conditioning and heating system operating efficiently.
Even if your air conditioning unit is still working, depending on the type of system in your home today, you could recoup your investment in a new system in as little as three years. However, that doesn't mean that your system needs to be replaced. Furnaces, air conditioners, and other heating and cooling systems have made tremendous gains in efficiency over the past five years, so if you have an older unit, it is worth taking a look at whether or not a repair is the best investment.
You can help prevent issues with your system by scheduling routine maintenance on your furnace every year. During a maintenance visit, our technician will inspect and clean your furnace to help the system to run more smoothly and efficiently for the coming winter. You can have it done any time, but the maintenance is typically performed in the fall. Ask about our planned service agreement program!
Next check and clean the furnace’s flame sensor. The video below shows you how—note that this guy fixes it in about 5 minutes. We would probably use a little bit of emory paper, but he cleans the sensor with a 5-dollar bill. Another video further down the page under the discussion of “If your furnace keeps shutting off after about 5 minutes” shows the same project with a different brand of furnace.
If your heater is relatively new, we will be able to repair it. If your furnace is antique, we will fix it if it can operate safely. The HVAC technician can check for cracks in the heat exchanger. Cracks can leak dangerous exhaust fumes into your living space. Sometimes, repairing a damaged furnace is more expensive and less efficient than replacing it.
As a family-owned business, we take care of our customers with a comprehensive list of services, including heating and cooling installation, maintenance and repair, boiler installation and service, hot water heater service and geothermal systems.  We protect your best interests and strive to eliminate inconvenience through emergency service, free estimates, flexible financing, and 10 year parts & labor warranty included on new furnace installations.  Call Choice Heating & Cooling for your home comfort needs and expect more.  From your initial inquiry to the completion of the job, our goal is to exceed your expectations in every service we provide.
We are open from 7am to 10pm every weekday and from 7am to 8pm on weekends. We book appointments in a 2 hour arrival window and call 30-45 mins before we arrive so you do not have to sit around waiting. It is often possible to schedule your appointment in the evening or morning hours to avoid conflicting with your work schedule. Are you looking for service today? Give us a call or click on one of the Schedule Service buttons found on the top and left sides of this page to contact us today.

Extensive training – Over the years, we have had to learn continually and update our skills to stay top-of-the-line. We continue to offer state-of-the-art products today with the service skills to match. We offer 800 hours of training classes to our technicians every year. They also have access to factory resource personnel and engineers for consultation.


We know that furnace breakdowns can happen at any time. As a full-time heating contractor, we keep abreast of current technologies and, as a result, our technicians are able to install or repair any heating system efficiently and in a timely manner. Whether you need furnace repair or installation, well-qualified Atlanta-based technicians are available to meet your needs.

You can usually slip the belt on the motor’s (smaller) pulley first and then start it on the blower pulley. Rotate the blower pulley by hand, holding the belt in place but keeping your fingers from getting caught between the belt and the pulley. The belt should slip right into place. If it seems to be too tight or difficult to set in place, it may be necessary to adjust the motor mount to provide more slack.
The best defense against the brutal heat and stifling humidity of Cohoes area summers is the convenient and affordable luxury of an air-conditioned home. Modern advancements in cooling technology have significantly improved performance, moisture control and longevity, while minimizing energy consumption, making this an ideal time to invest in refreshingly cool comfort for your home. Trained to perform safe and efficient installations that are always done perfectly, Choice Heating & Cooling technicians maximize reward and reliability, while minimizing energy costs and sound levels.

CM Heating performed an electric furnace Diagnostic - Upon investigation, I found that the sequencer has failed which is why all heat elements are not being activated (3 out of 5 work). This is the second replacement sequencer needed in less than 5 years of operation, the unit is an old model of air handler and only source of heat. Replacement of sequencer is needed, however, based on age and efficiency recommend upgrade of system.
Next check and clean the furnace’s flame sensor. The video below shows you how—note that this guy fixes it in about 5 minutes. We would probably use a little bit of emory paper, but he cleans the sensor with a 5-dollar bill. Another video further down the page under the discussion of “If your furnace keeps shutting off after about 5 minutes” shows the same project with a different brand of furnace.
When it comes to heater repair in Denver, a properly serviced system means significant savings for the homeowner. When a Denver heating technician inspects your system before the winter sets in, the first thing they will check is the condition of the air filters. These filters are important, because they are responsible for removing contaminants, allergens, and dust particles from the air every time the system is turned on. When the filters are clogged, expect more particles to easily pass through right into the air you breathe inside the home. The Denver heating experts will inspect and replace any filters that are no longer effective.

The chill of winter can be a scary thought when your furnace needs a repair. When the furnace in your home goes on the fritz, you need it fixed right away to keep your family safe and comfortable. Every BGE HOME technician is licensed in their trade and adheres to a stringent in-house certification program that guarantees their knowledge, affirms their commitment to the customer, and ensures excellence in completing every repair with the highest level of quality. Our technicians average 11 years in the HVAC industry, so you can rest assured that the technician who makes your furnace repair is knowledgeable and experienced.

More often than not it’s because we’re afraid of high costs of service and finding the right company we can trust. When you choose Signature Heating, Cooling & Plumbing, there’s no need to worry. Rest assured our qualified and trained technicians can handle any type of service repair to maintain a quality of comfort your family is used to. We schedule your appointments with a date and time that can fit with your scheduling needs. We offer high-quality services at fair prices, giving you the best value for your money.
Put simply, any home that uses air pushed through ductwork for heating purposes takes advantage of forced air heating. In other words, this term refers not to your furnace, but to the delivery method of the heat throughout your home. Forced air heating is possible with electric or gas furnaces, or a heat pump. Any issues with this delivery system that aren't directly related to the furnace likely have to do with the duct work, which costs between $35 and $55 per linear square foot to repair, or the air handling unit.
At Bob’s Heating & Air Conditioning, we believe that our customers deserve to live comfortably throughout the entire year. That is why we offer such a comprehensive selection of air conditioning, heating and water heater services in Kirkland, WA. When you work with us, you can rest assured that your furnace is installed properly, your AC maintenance is meticulous, and that your water heater repairs are top notch. Contact us today to learn more about the heating and cooling services we offer throughout Kirkland, WA.

Furnace Service Company CO

×